2. Port Configuration: Enable or disable port speed, flow control, etc.
3. Link Aggregation: Set up port trunk and LACP port configuration.
4. Rapid Spanning Tree: Set up RSTP switch settings, aggregated port settings, physical port
settings, etc.
5. 802.1X Configuration: Set up the 802.1X system, port Admin state, port reauthenticate.
6. MAC Address Management: Set up MAC address, enable or disable MAC security, etc.
7. VLAN Configuration: Set up VLAN mode and VLAN configuration.
8. QoS Configuration: Set up the priority queuing, rate limit and storm control.
9. DSCP Remark: Set up DSCP Remarking, 802.1p remarking and queue remarking.
10. Port Mirroring: Set up target port mirrors source port to enable traffic monitoring.
11. IGMP Snooping: Enable or disable IGMP and set up IGMP VLAN ID configuration.
12. Static Multicast Configuration: To create, edit or delete Static Multicast table.
13. MVR Configuration: Enable or disable MVR and create MVR VLAN setting.
14. Security Configuration: Set up DHCP option 82 agent relay, port setting, filtering and static IP
table configuration.
15. Access Control List Management: Set up access control entries and lists.
16. LLDP Configuration: Enable or disable LLDP on ports and set up LLDP-related attributes.
17. Loop Detection Configuration: Enable or disable Loop Detection function and set up Loop
Detection configuration.
To Next Page
Loading...
