1. INTRODUCTION
Thank you for using the 24 dual-speed combo ports plus 2 Gigabit combo ports Managed Switch
that is specifically designed for SMB (small and medium businesses), SME and for FTTx
applications. The Managed Switch provides a built-in management module that enables users to
configure and monitor the operational status both locally and remotely. This User‟s Manual will
explain how to use command-line interface and Web Management to configure your Managed
Switch. The readers of this manual should have knowledge about their network typologies and
about basic networking concepts so as to make the best of this user‟s manual and maximize the
Managed Switch‟s performance for your personalized networking environment.
1.1 Interface
There are 4 models in this series. Descriptions and interface figures are provided below:
Model 1 – 24 dual-speed combo ports plus 2 Gigabit combo ports Managed Switch with fixed 1
AC
Model 2 – 24 dual-speed combo ports plus 2 Gigabit combo ports Managed Switch with fixed 2
Redundant AC
Model 3 – 24 dual-speed combo ports plus 2 Gigabit combo ports Managed Switch with fixed 1
DC
Model 4 – 24 dual-speed combo ports plus 2 Gigabit combo ports Managed Switch with fixed 2
Redundant DC
These 4 models have the same front panel:
Figure 1: Front Panel
Each model has a different rear panel:
Figure 2-1: Model 1 Rear Panel
Figure 2-2: Model 2 Rear Panel
Figure 2-3: Model 3 Rear Panel
To Next Page
Loading...
Need help?
General
