Select Load Factory Setting Except Network Configuration from the System Utility menu, the
following screen page shows up.
Click OK to start loading factory settings except network configuration.
4.6.5 Backup Configuration
Select Backup Configuration from the System Utility menu and then the following screen page
appears.
Auto Backup: To enable or disable auto backup. The default setting is disabled.
Backup Time: Set up the time (24-hr clock) to automatically backup once a day. If the remote
server fails or does not exist, this function allows the system to retry around once per minute until
the system completes a successful backup or the system times out (next hour).
Protocol: Select FTP or TFTP server to backup
Server Address: Specify a FTP or TFTP server IP address.
User Name: Specify a username for FTP server.
Password: Specify a password for FTP server.
File Directory: Specify the local file directory where backup files will be saved.
File Name: The name of backup files which will be saved by date.
To Next Page
Loading...
