VLAN ID: Specify a VLAN ID number that is registered in MVR port settings.
Group Range: Specify the multicasting channels that would belong to MVR VLAN.
4.4.14 Security Configuration
In this section, several Layer 2 security mechanisms are provided to increase the security level of
your Managed Switch. Layer 2 attacks are typically launched by or from a device that is physically
connected to the network. For example, it could be a device that you trust but has been taken over
by an attacker. By default, most security functions available in this Managed Switch are turned off,
to prevent your network from malicious attacks, it is extremely important for you to set up
appropriate security configurations. This section provides several security mechanisms to protect
your network from unauthorized access to a network or redirect traffic for malicious purposes,
such as Source IP Spoofing and ARP Spoofing.
Select the folder Security Configuration from the Switch Management menu and then the
following screen page appears.
1. DHCP Option 82 Settings: To enable or disable DHCP Option 82 relay agent global setting
and show each port‟s configuration.
2. DHCP Port Settings: Customer port (Port 1~24) DHCP snooping setting.
3. Filter Configuration: Customer port (Port 1~24) filtering setting.
4. Static IP Table Configuration: To create static IP table for DHCP snooping setting.
5. Storm Control: To prevent the Managed Switch from unicast, broadcast, and multicast storm.
6. Anti-bcast Configuration: To set up anti-broadcasting polling interval and threshold.
To Next Page
Loading...
Need help?
General
