In the Main Menu, there are 9 main functions, including System Information, User Authentication,
Network Management, Switch Management, Switch Monitor, System Utility, Save Configuration,
Reset System and Logout contained. We will respectively describe their sub-functions in the
following sections of this chapter.
System Information: Name the Managed Switch, specify the location and check the current
version of information.
User Authentication: View the registered user list. Add a new user or remove an existing user.
Network Management: Set up or view the Managed Switch’s IP address and related
information required for network management applications.
Switch Management: Set up the switch/port configuration, VLAN configuration and other
functions.
Switch Monitor: View the operation status and traffic statistics of the ports.
System Utility: Ping, do the firmware upgrade, load the factory default settings, etc..
Save Configuration: Save all changes to the system.
To Next Page
Loading...
Need help?
General
