CTS FOS-3128 Series - Archive Command

31
2.6.5 Archive Command
Command
Parameter
Description
Switch(config)# archive
auto-backup
Enable the auto-backup configuration
files function.
Switch(config)# archive
auto-backup path ftp
[A.B.C.D |
A:B:C:D:E:F:G:H]
[file_directory] [user_name]
[password]
[A.B.C.D |
A:B:C:D:E:F:G:H]
Specify the IP/ IPv6 address of the
FTP server.
[file_directory]
Specify the file directory of the FTP
server to save the start-up
configuration files.
[user_name]
Specify the user name to login the FTP
server.
[password]
Specify the password for FTP server’s
authentication.
Switch(config)# archive
auto-backup path tftp
[A.B.C.D |
A:B:C:D:E:F:G:H]
[file_directory]
[A.B.C.D |
A:B:C:D:E:F:G:H]
Specify the IP/ IPv6 address of the
TFTP server.
[file_directory]
Specify the file directory of the TFTP
server to save the start-up
configuration files.
Switch(config)# archive
auto-backup time [0-23]
[0-23]
Specify the time to begin the automatic
backup of the start-up configuration
files everyday.
No command
Switch(config)# no archive
auto-backup
Disable the auto-backup function.
Switch(config)# no archive
auto-backup path
Remove TFTP / FTP server settings.
Switch(config)# no archive
auto-backup time
Reset the Auto-backup time back to
the default (0 o’clock).
Show command
Description
Switch# show archive
auto-backup
Display the auto-backup configuration.
Switch(config)# show
archive auto-backup
Display the auto-backup configuration.