4.4.6.2 Static MAC Table Configuration
Click the option Static MAC Table Configuration from the MAC Address Management menu
and then the following screen page appears.
NOTE: The Managed Switch only supports switch-based MAC security and does not
support port-based MAC security. The Managed Switch can support up to 128 entries of
MAC security list.
Click New to add a new MAC address entity and then the following screen page appears.
Click Delete to remove a MAC address entry.
Current/Total/Max: The number of current, total and maximum MAC address entry or entries.
MAC Address: Specify a destination MAC address in the packet with the 00:00:00:00:00:00
format.
VID: Specify the VLAN where the packets with the Destination MAC address can be forwarded.
Forwarding Port: If the incoming packet has the same destination MAC address as the one
specified in VID, it will be forwarded to the selected port directly.
To Next Page
Loading...
