CTS FOS-3128 Series User Manual

196
4.4.10 Static Multicast Configuration
Select the option Static Multicast Configuration from the Switch Management menu and then
the following screen page appears.
IP/IPv6 Address: View-only field that shows the current source IP address of multicast stream.
VID: View-only field that shows the specified VLAN ID for current multicast stream.
Forwarding port: View-only field that shows the forwarding port for current multicast stream.
Click New to register a new Static Multicast configuration and then the following screen page
appears.
Click Edit to modify static multicast configuration settings.
Click Delete to remove a current Static Multicast configuration.
Current/Total/Max Agents: View-only field.
Current: This shows the number of current registered static multicast configuration.
Total: This shows the amount of total registered static multicast configuration.
Max: This shows the maximum number available for static multicast configuration. The
default maximum number is 128.

CTS FOS-3128 Series Specifications

General

Brand	CTS
Model	FOS-3128 Series
Category	Switch
Language	English