4.4.8 QoS Configuration
Network traffic is always unpredictable and the only basic assurance that can be offered is the
best effort traffic delivery. To overcome this challenge, Quality of Service (QoS) is applied
throughout the network. This ensures that network traffic is prioritized according to specified
criteria and receives preferential treatments.
QoS enables you to assign various grades of network service to different types of traffic, such as
multi-media, video, protocol-specific, time critical, and file-backup traffic. To set up the priority of
packets in the Managed Switch, click the folder QoS Configuration from the Switch
Management menu and then two options within this folder will be displayed.
1. QoS Priority: To set up each port’s QoS default class, Priority, Queuing Mode, Queue
Weighted and Remarking.
2. QoS Rate Limit: To configure each port’s Ingress and Egress Rate.
4.4.8.1 QoS Priority
Select the option QoS Priority from the QoS Configuration menu and then the following screen
page appears.
To Next Page
Loading...
