CTS FOS-3128 Series - Switch-Info Command

98
2.6.22 Switch-info Command
1. Set up the Managed Switch’s basic information, including company name, hostname,
system name, etc..
Switch-info Command
Parameter
Description
Switch(config)# switch-info
company-name
[company_name]
[company_name]
Enter a company name, up to 55
alphanumeric characters, for this Managed
Switch.
Switch(config)# switch-info
cpu-loading-threshold [10-
3000]
[10-3000]
(Unit: 1/100)
Specify CPU loading threshold.
Switch(config)# switch-info
dhcp-vendor-id
[dhcp_vendor_id]
[dhcp_vendor_id]
Enter a DHCP vendor ID, up to 55
alphanumeric characters, for this Managed
Switch.
Switch(config)# switch-info
host-name [host_name]
[host_name]
Enter a new hostname, up to 30
alphanumeric characters, for this Managed
Switch. By default, the hostname prompt
shows the model name of this Managed
Switch. You can change the factory-
assigned hostname prompt to the one that
is easy for you to identify during network
configuration and maintenance.
Switch(config)# switch-info
system-contact
[sys_contact]
[sys_contact]
Enter the contact information, up to 55
alphanumeric characters, for this Managed
switch.
Switch(config)# switch-info
system-location
[sys_location]
[sys_location]
Enter a brief description of the Managed
Switch location, up to 55 alphanumeric
characters, for this Managed Switch. Like
the name, the location is for reference
only, for example, “13th Floor”.
Switch(config)# switch-info
system-name [sys_name]
[sys_name]
Enter a unique name, up to 55
alphanumeric characters, for this Managed
Switch. Use a descriptive name to identify
the Managed Switch in relation to your
network, for example, “Backbone 1”. This
name is mainly used for reference only.
No command
Switch(config)# no switch-info company-name
Reset the entered company name back to
the default.
Switch(config)# no switch-info cpu-loading-
threshold
Reset CPU loading threshold back to the
default.
Switch(config)# no switch-info dhcp-vendor-id
Reset the entered DHCP vendor ID
information back to the default.
Switch(config)# no switch-info system-contact
Reset the entered system contact
information back to the default.
Switch(config)# no switch-info system-location
Reset the entered system location
information back to the default.
Switch(config)# no switch-info system-name
Reset the entered system name
information back to the default.
Switch(config)# no switch-info host-name
Reset the hostname back to the default.