4.4.3.1 Distribution Rule
Click the option Distribution Rule from the Link Aggregation menu, the following screen page
appears.
There are six rules offered for you to set up packets according to operations.
Source IP Address: Enable or disable packets according to source IP address.
Destination IP Address: Enable or disable packets according to Destination IP address.
Source L4 Port: Enable or disable packets according to source L4 Port.
Destination L4 Port: Enable or disable packets according to Destination L4 Port.
Source MAC Address: Enable or disable packets according to source MAC address.
Destination MAC Address: Enable or disable packets according to Destination MAC address.
4.4.3.2 Port Trunking
Click the option Port Trunking from the Link Aggregation menu and then the following screen
page appears.
To Next Page
Loading...
