4.4.12.7 Static IP/IPv6 Table Configuration
Select the option Static IP/IPv6 Table Configuration from the Security Configuration menu and
then the following screen page appears.
This static IP address and Port mapping table shows the following information.
IP/IPv6 Address: View-only field that shows the current static IP address.
VLAN ID: View-only field that shows the VLAN ID.
Port: View-only field that shows the connection port number.
Click New to register a new Static IP address and then the following screen page appears.
Click Edit to modifyStatic IP Table settings.
Use Delete to remove a current Static IP address.
Current/Total/Max Users: View-only field.
Current: This shows the number of current registered Static IP address.
Total: This shows the amount of total registered Static IP addresses.
Max: This shows the maximum number available for Static ID address registration.
IP/IPv6 address: Specify an IP/IPv6 address that you accept.
VLAN ID: Specify the VLAN ID. (0 means without VLAN ID)
Port: Specify the communication port number. (Port 1~28)
To Next Page
Loading...
Need help?
General
