EasyManuals Logo

CTS FOS-3128 Series User Manual

CTS FOS-3128 Series
300 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
17
Example 2: specifying three values
(separated by commas)
Switch(config)#qos 802.1p-map 1,3 0
Switch(config)#qos dscp-map 10,13,15 3
Example 3: specifying a range of values
(separated by a hyphen)
Switch(config)#qos 802.1p-map 1-3 0
Switch(config)#qos dscp-map 10-15 3
2.3.4 Login Username & Password
Default Login
When you enter Console session, a login prompt for username and password will appear to
request a valid and authorized username and password combination. For first-time users, enter
the default login username admin and press Enter key in password field (no password is
required for default setting). When system prompt shows “Switch>”, it means that the user has
successfully entered the User mode.
For security reasons, it is strongly recommended that you add a new login username and
password using User command in Configuration mode. When you create your own login
username and password, you can delete the default username (admin) to prevent unauthorized
accesses.
Privileged Mode Password
Privileged mode is password-protected. When you try to enter Privileged mode, a password
prompt will appear to request the user to provide the legitimate passwords. Privileged mode
password is the same as the one entered after login password prompt. By default, no password is
required. Therefore, press Enter key in password prompt.
Forgot Your Login Username & Password
If you forgot your login username and password, you can use the “reset buttonon the front panel
to set all configurations back to factory defaults. Once you have performed system reset to
defaults, you can login with default username and password. Please note that if you use this
method to gain access to the Managed Switch, all configurations saved in Flash will be lost. It is
strongly recommended that a copy of configurations is backed up in your local hard-drive or file
server from time to time so that previously-configured settings can be reloaded to the Managed
Switch for use when you gain access again to the device.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CTS FOS-3128 Series and is the answer not in the manual?

CTS FOS-3128 Series Specifications

General IconGeneral
BrandCTS
ModelFOS-3128 Series
CategorySwitch
LanguageEnglish

Related product manuals