4.6 System Utility
System Utility allows users to easily operate and maintain the system. Select the folder System
Utility from the Main Menu and then the following screen page appears.
1. Ping: Ping can help you test the network connectivity between the Managed Switch and the
host. You can also specify count s, timeout and size of the Ping packets.
2. Event Log: Event log can keep a record of system’s log events such as system warm start,
cold start, link up/down, user login/logout, etc. They will be kept only when your CPU version
is A06 with Boot ROM version A08 or later version. If your CPU or Boot ROM version is older
than the one mentioned above, all events will lose when the system is shut down or rebooted.
3. HTTP/FTP/TFTP Upgrade: This allows users to update the latest firmware, save current
configuration or restore previous configuration to the Managed Switch.
4. Load Factory Settings: Load Factory Setting will set the configuration of the Managed Switch
back to the factory default settings. The IP and Gateway addresses will be reset to the factory
default as well.
5. Load Factory Settings Except Network Configuration: Selecting this function will also
restore the configuration of the Managed Switch to its original factory default settings. However,
this will not reset the IP and Gateway addresses to the factory default.
6. Auto-Backup Configuration: Periodically execute the automatic backup of the start-up
configuration files based on the given time you set up.
To Next Page
Loading...
Need help?
General
