Host Name: Enter the product’s host name.
Current Boot Image: The image that is currently being used.
Configured Boot Image: The image you would like to use after rebooting.
Image-1 Version: Display the firmware version 1 (image-1) used in this device.
Image-2 Version: Display the firmware version 2 (image-2) used in this device.
M/B Version: Display the main board version.
Serial Number: Display the serial number of this Managed Switch.
Date Code: Display the date code of the Managed Switch firmware.
Up Time: Display the up time since last restarting.
Local Time: Display the local time of the system.
CPU Temperature: Display the current CPU temperature of this device. In case CPU temperature
is shown in red color, it stands that CPU temperature currently detected is higher than the High
Temperature Threshold value you configure. For more details on this or do the further alarm
notification settings for CPU temperature of the system, click View Details to directly jump to the
CPU Temperature Status webpage under Switch Monitor menu.
FAN State: Display the status of FAN1 and FAN2.
Power A/B: Display the installation status, the type of power source, and state of Power A and
Power B.
To Next Page
Loading...
Need help?
General
