Source MAC: Select “Any” or specify a source MAC address.
Destination MAC: Select “Any” or specify a destination MAC address.
TOS/Traffic Class: Select “Any” or specify a TOS/Traffic class.
Protocol/Next Header: Specify IPv4 protocol and IPv6 next header
IPv4 Source IP: Select “Any” or specify an IPv4 Source IP address.
IPv4 Destination IP: Select “Any” or specify an IPv4 Destination IP address.
IPv6Source IP: Select “Any” or specify an IPv6 Source IP address.
IPv6 Destination IP: Select “Any” or specify an IPv6 Destination IP address.
TCP/UDP Source Port: Select “Any” to filter frames from any source port or specify a source port
number.
TCP/UDP Destination Port: Select “Any” to filter frames bound for any destination port or specify
a destination port number.
Action: Deny or permit the action.
Mirror/Redirect Port Number: Specify a port number that you would like to configure for
Mirror/Redirect.
Rate Limiter: Configure the rate limiter. Valid Range: (16-1048560) Kbps, 0:Disable.
To Next Page
Loading...
Need help?
General
