CTS FOS-3128 Series - Page 34

34
STEP9
interface port_list
Example:
FOS-3128(config)# interface 1,3
FOS-3128(config-if-1,3)#
Speciy the interface that
you would like to set to
Trunking Group.
STEP10
channel-group trunking group_name
Example:
FOS-3128(config-if-1,3)# channel-group trunking CTSGROUP
OK !
In this example, it
configures Port 1 and Port
3 as the link membership
of “CTSGROUP”Trunking
Group
STEP11
exit
Example:
FOS-3128(config-if-1,3)# exit
FOS-3128(config)#
Return to the global
configuration mode.
STEP12
exit
Example:
FOS-3128(config)# exit
FOS-3128#
Return to the Privileged
mode.
STEP13
write
Example:
FOS-3128# write
Save Config Succeeded! OK !
Save the running
configuration into the
startup configuration.