EasyManua.ls Logo

CTS FOS-3128 Series - Page 42

CTS FOS-3128 Series
300 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
3. Enable DHCP/DHCPv6 relay function.
IP DHCP Snooping
Command
Parameter
Description
Switch(config)# ip dhcp
snooping
Enable DHCP/DHCPv6 snooping
function.
Switch(config)# ip dhcp
snooping dhcp-server
[port_list]
[port_list]
Specify DHCP/DHCPv6 server trust
port(s).
Switch(config)# ip dhcp
snooping dhcp-server-ip
Globally enable DHCP/DHCPv6 server
trust IP/IPv6 address.
Switch(config)# ip dhcp
snooping dhcp-server-ip [1-
4] ip-address [A.B.C.D |
A:B:C:D:E:F:G:H]
[1-4]
Specify DHCP/DHCPv6 server trust
IP/IPv6 address number.
[A.B.C.D |
A:B:C:D:E:F:G:H]
Specify DHCP/ DHCPv6 server trust IP/
IPv6 address.
Switch(config)# ip dhcp
snooping initiated [0-9999]
[0-9999]
Specify the DHCP/DHCPv6 snooping
Initiated Time value (0~9999 seconds)
that packets might be received.
Switch(config)# ip dhcp
snooping leased [180-
259200]
[180-259200]
Specify the DHCP/DHCPv6 snooping
Leased Time for DHCP clients.
(Range:180~259200 seconds).
Switch(config)# ip dhcp
snooping option
Globally enable DHCP Option 82 /
DHCPv6 Option 37 relay agent.
Switch(config)# ip dhcp
snooping remote
Enable DHCP Option 82 / DHCPv6
Option 37 Manual Remote Id.
Switch(config)# ip dhcp
snooping remote formatted
Enable the Formatted Option 82 /
DHCPv6 Option 37 Remote Id.
Switch(config)# ip dhcp
snooping remote id
[remote_id]
[remote_id]
You can configure the DHCP Option 82 /
DHCPv6 Option 37 remote ID to be a
string of up to 63 characters. The default
remote ID is the switch MAC address.
No command
Switch(config)# no ip dhcp
snooping
Disable DHCP/DHCPv6 snooping
function.
Switch(config)# no ip dhcp
snooping dhcp-server
Remove DHCP/DHCPv6 server trust
port(s).
Switch(config)# no ip dhcp
snooping dhcp-server-ip
Globally disable DHCP/DHCPv6 server
trust IP/IPv6 address.
Switch(config)# no ip dhcp
snooping dhcp-server-ip [1-
4] ip-address
Remove DHCP/DHCPv6 server trust
IP/IPv6 address from the specified trust
IP/IPv6 address number.
Switch(config)# no ip dhcp
snooping initiated
Reset the initiated time value back to the
default setting. (4 seconds)
Switch(config)# no ip dhcp
snooping leased
Reset the leased time value back to the
default setting.(86400 seconds)
Switch(config)# no ip dhcp
snooping option
Disable DHCP Option 82 / DHCPv6
Option 37 relay agent.
Switch(config)# no ip dhcp
snooping remote
Disable DHCP Option 82 / DHCPv6
Option 37 Manual Remote Id.

Table of Contents

Related product manuals