CTS FOS-3128 Series User Manual

87
Switch(config)# show
spanning-tree interface
Show each interface’s RSTP information,
including port state, path cost, priority,
edge port state, and p2p port state.
Switch(config)# show
spanning-tree interface
[port_list]
[port_list]
Show the specified interfaces’ RSTP
information, including port state, path
cost, priority, edge port state, and p2p
port state.
Switch(config)# show
spanning-tree statistic
Show each interface and each link
aggregation group’s statistics
information, including the total RSTP
packets received, RSTP packets
transmitted, STP packets received, STP
packets transmitted, TCN (Topology
Change Notification) packets received,
TCN packets transmited, illegal packets
received, and unknown packets
received.
Switch(config)# show
spanning-tree statistic
[port_list | llag]
[port_list | llag]
Show the specified interfaces or link
aggregation groups’ statistics
information, including the total RSTP
packets received, RSTP packets
transmitted, STP packets received, STP
packets transmitted, TCN (Topology
Change Notification) packets received,
TCN packets transmited, illegal packets
received, and unknown packets
received.
Switch(config)# show
spanning-tree status
Show the current RSTP port status.
Switch(config)# show
spanning-tree status [port_list
| llag]
[port_list | llag]
Show the specified interfaces or link
aggregation groups’ status.
Switch(config)# show
spanning-tree overview
Show the current root-related
information.
Examples of Spanning-tree command
Description
Switch(config)# spanning-tree aggregated-
port
Enable Spanning Tree on aggregated
ports.
Switch(config)# spanning-tree aggregated-
port cost 100
Set the aggregated ports’ cost to 100.
Switch(config)# spanning-tree aggregated-
port priority 0
Set the aggregated ports’ priority to 0
Switch(config)# spanning-tree aggregated-
port edge
Set the aggregated ports to edge ports.
Switch(config)# spanning-tree aggregated-
port p2p forced_true
Set the aggregated ports to P2P ports.
Switch(config)# spanning-tree delay-time 10
Set the Forward Delay time value to 10
seconds.
Switch(config)# spanning-tree hello-time 2
Set the Hello Time value to 2 seconds.
Switch(config)# spanning-tree max-age 15
Set the Maximum Age value to 15
seconds.

CTS FOS-3128 Series Specifications

General

Brand	CTS
Model	FOS-3128 Series
Category	Switch
Language	English