D-Link DGS-3000 series - Show Authorization

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
140
RADIUS server or local database, will be ignored even if the individual module’s setting is enabled.
Authorization for attributes is enabled by default.
Format
disable authorization attributes
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
This example sets authorization global state disabled:
DGS-3000-26TC:admin#disable authorization attributes
Command: disable authorization attributes
Success.
DGS-3000-26TC:admin#
14-3 show authorization
Description
This command is used to display authorization status.
Format
show authorization
Parameters
None.
Restrictions
None.
Example
This example displays authorization status: