D-Link DGS-3000 series - Show Qinq

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
546
DGS-3000-26TC:admin#config qinq ports 1-4 role nni outer_tpid 0x88A8
Command: config qinq ports 1-4 role nni outer_tpid 0x88A8
Success.
DGS-3000-26TC:admin#
61-5 show qinq
Description
This command is used to display the global QinQ status.
Format
show qinq
Parameters
None.
Restrictions
None.
Example
To display the global QinQ status:
DGS-3000-26TC:admin#show qinq
Command: show qinq
QinQ Status : Enabled
DGS-3000-26TC:admin#
61-6 show qinq inner_tpid
Description
This command is used to display the inner-TPID of a system.
Format
show qinq inner_tpid
Parameters
None.