D-Link DGS-3000 series - Enable Snmp; Disable Snmp

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
614
Example
To show SNMP engine ID:
DGS-3000-26TC:admin#show snmp engineID
Command: show snmp engineID
SNMP Engine ID : 1023457890
DGS-3000-26TC:admin#
69-19 enable snmp
Description
This command is used to enable the SNMP function.
Format
enable snmp
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable SNMP:
DGS-3000-26TC:admin#enable snmp
Command: enable snmp
Success.
DGS-3000-26TC:admin#
69-20 disable snmp
Description
This command is used to disable the SNMP function.
Format
disable snmp
Parameters
None.