D-Link DGS-3000 series - Delete Syslog Host; Show Syslog Host

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
646
DGS-3000-26TC:admin#config syslog host all severity debug facility local0
Command: config syslog host all severity debug facility local0
Success.
DGS-3000-26TC:admin#
72-9 delete syslog host
Description
This command is used to delete the syslog host(s).
Format
delete syslog host [<index 1-4> | all]
Parameters
<index> - Enter the host index value here.
all - Specifies that all the host indexes will be used.
Restrictions
Only Administrators and Operators can issue this command.
Example
To delete the specific syslog host:
DGS-3000-26TC:admin#delete syslog host 4
Command: delete syslog host 4
Success.
DGS-3000-26TC:admin#
72-10 show syslog host
Description
This command is used to display the syslog host configurations.
Format
show syslog host {<index 1-4>}
Parameters
<index> - (Optional) Enter the host index value here.
If no parameter is specified, all hosts will be displayed.