D-Link DGS-3000 series - Enable Syslog

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
641
DGS-3000-26TC:admin#show log index 1-3
Command: show log index 1-3
Index Date Time Level Log Text
----- ---------- -------- ------- ----------------------------------------------
3 2000-01-01 00:00:40 CRIT(2) System started up
2 2000-01-01 00:00:40 CRIT(2) System cold start
1 2000-01-01 01:49:30 INFO(6) Anonymous: execute command "reset system".
DGS-3000-26TC:admin#
72-3 show log_software_module
Description
This command is used to display the protocols or applications that support the enhanced log. The
enhanced log adds the module name and module ID. Network administrators can display logs by
module name or module ID.
Format
show log_software_module
Parameters
None.
Restrictions
None.
Example
To display the protocols or applications that support the enhanced log:
DGS-3000-26TC:admin#show log_software_module
Command: show log_software_module
ERPS ERROR_LOG MSTP
DGS-3000-26TC:admin#
72-4 enable syslog
Description
This command is used to enable the sending of syslog messages.
Format
enable syslog