D-Link DGS-3000 series - Enable Ssh; Disable Ssh

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
582
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure SSH server maximum session number is 3:
DGS-3000-26TC:admin#config ssh server maxsession 3
Command: config ssh server maxsession 3
Success.
DGS-3000-26TC:admin#
65-8 enable ssh
Description
This command is used to enable SSH server services.
Format
enable ssh
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable SSH server:
DGS-3000-26TC:admin#enable ssh
Command: enable ssh
Success.
DGS-3000-26TC:admin#
65-9 disable ssh
Description
This command is used to disable SSH server services.
Format
disable ssh