D-Link DGS-3000 series - Chapter 75 TFTP;FTP Client Command List

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
653
Chapter 75 TFTP/FTP Client Command
List
download [firmware_fromTFTP {[<ipaddr> | <ipv6addr> | <domain_name 255>] src_file
<path_filename 64> {dest_file <pathname 64>} {boot_up}} | cfg_fromTFTP {[<ipaddr> |
<ipv6addr> | <domain_name 255>] src_file <path_filename 64> {dest_file <pathname 64>}} |
firmware_fromFTP [<ipaddr> {tcp_port <tcp_port_number 1-65535>} src_file <path_filename
64> | ftp:<string user:password@ipaddr:tcpport/path_filename>] {dest_file <path_filename
64> {boot_up}} | cfg_fromFTP [<ipaddr> {tcp_port <tcp_port_number 1-65535>} src_file
<path_filename 64> | ftp: <string user:password@ipaddr:tcpport/path_filename>] {dest_file
<path_filename 64>}]
upload [cfg_toTFTP {[<ipaddr> | <ipv6addr> | <domain_name 255>] dest_file <path_filename 64>
{src_file <pathname 64>} {[include | exclude | begin] <filter_string 80> {<filter_string 80>
{<filter_string 80>}} {[include | exclude | begin] <filter_string 80> {<filter_string 80>
{<filter_string 80>}} {[include | exclude | begin ] <filter_string 80> {<filter_string 80>
{<filter_string 80>}}}}}} | log_toTFTP{ [<ipaddr> | <ipv6addr> | <domain_name 255>] dest_file
<path_filename 64>} | attack_log_toTFTP {[<ipaddr> | <ipv6addr> | <domain_name 255>]
dest_file <path_filename 64>} | firmware_toTFTP {[<ipaddr> | <ipv6addr> | <domain_name
255>] dest_file <path_filename 64> {src_file <path_filename 64>}} | cfg_toFTP [<ipaddr>
{tcp_port <tcp_port_number 1-65535>} dest_file <path_filename 64> | ftp: <string
user:password@ipaddr:tcpport/path_filename>] {src_file <path_filename 64>} {[include |
exclude | begin] <filter_string 80> {<filter_string 80> {<filter_string 80>}} {[include | exclude |
begin ] <filter_string 80> {<filter_string 80>{<filter_string 80>}} {[include | exclude | begin ]
<filter_string 80> {<filter_string 80> {<filter_string 80>}}}}} | log_toFTP [<ipaddr> {tcp_port
<tcp_port_number 1-65535>} dest_file <path_filename 64> | ftp: <string
user:password@ipaddr:tcpport/path_filename>] | attack_log_toFTP [<ipaddr> {tcp_port
<tcp_port_number 1-65535>} dest_file <path_filename 64> | ftp: <string
user:password@ipaddr:tcpport/path_filename>] | firmware_toFTP [<ipaddr> {tcp_port
<tcp_port_number 1-65535>} dest_file <path_filename 64> | ftp: <string
user:password@ipaddr:tcpport/path_filename>] {src_file <pathname 64>}]
config tftp {server <ipaddr> | firmware_file <path_filename 64> | cfg_file <path_filename 64> |
log_file <path_filename 64> | attack_log_file <path_filename 64> | certificate_file
<path_filename 64> | key_file <path_filename 64> | tech_support_file <path_filename 64> |
debug_error_log_file <path_filename 64> | sim_firmware_file <path_filename 64> |
sim_cfg_file <path_filename 64> | sim_log_file <path_filename 64>}
show tftp
75-1 download
Description
This command is used to download the firmware image and configuration from TFTP/FTP server.
Format
download [firmware_fromTFTP {[<ipaddr> | <ipv6addr> | <domain_name 255>] src_file
<path_filename 64> {dest_file <pathname 64>} {boot_up}} | cfg_fromTFTP {[<ipaddr> |
<ipv6addr> | <domain_name 255>] src_file <path_filename 64> {dest_file <pathname 64>}} |
firmware_fromFTP [<ipaddr> {tcp_port <tcp_port_number 1-65535>} src_file <path_filename
64> | ftp:<string user:password@ipaddr:tcpport/path_filename>] {dest_file <path_filename
64> {boot_up}} | cfg_fromFTP [<ipaddr> {tcp_port <tcp_port_number 1-65535>} src_file