D-Link DGS-3000 series - Show Dscp Trust

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
564
Restrictions
None.
Example
To show the 802.1p color mapping on port 1:
DGS-3000-26TC:admin#show 802.1p map 1p_color 1
Command: show 802.1p map 1p_color 1
802.1p to Color Mapping:
----------------------------------------------------------------
Port 0 1 2 3 4 5 6 7
---- ------ ------ ------ ------ ------ ------ ------ ------
1 Green Green Green Green Green Green Green Green
DGS-3000-26TC:admin#
62-16 show dscp trust
Description
This command is used to display DSCP trust state for the specified ports on the Switch.
Format
show dscp trust {<portlist>}
Parameters
<portlist> - (Optional) A range of ports to display.
If not specify the port, all ports for DSCP trust status on the Switch will be displayed.
Restrictions
None.
Example
Display DSCP trust status on ports 1-8.