D-Link DGS-3000 series - Disable Lldp

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
369
Format
enable lldp
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable LLDP:
DGS-3000-26TC:admin#enable lldp
Command: enable lldp
Success.
DGS-3000-26TC:admin#
41-2 disable lldp
Description
This command is used to stop sending and receiving of LLDP advertisement packet.
Format
disable lldp
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable LLDP:
DGS-3000-26TC:admin#disable lldp
Command: disable lldp
Success.
DGS-3000-26TC:admin#