D-Link DGS-3000 series - Disable Sntp; Config Time

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
665
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable SNTP:
DGS-3000-26TC:admin#enable sntp
Command: enable sntp
Success.
DGS-3000-26TC:admin#
76-4 disable sntp
Description
This command is used to turn off SNTP support.
Format
disable sntp
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable SNTP:
DGS-3000-26TC:admin#disable sntp
Command: disable sntp
Success.
DGS-3000-26TC:admin#
76-5 config time
Description
This command is used to configure time and date settings of the device.