D-Link DGS-3000 series - Config Radius Delete

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
569
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To add a new RADIUS server:
DGS-3000-26TC:admin#config radius add 1 10.48.74.121 key dlink default
Command: config radius add 1 10.48.74.121 key dlink default
Success.
DGS-3000-26TC:admin#
63-2 config radius delete
Description
This command is used to delete a RADIUS server.
Format
config radius delete <server_index 1-3>
Parameters
<server_index 1-3> - Specifies to delete a RADIUS server.Enter the RADIUS server index.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete a radius server:
DGS-3000-26TC:admin#config radius delete 1
Command: config radius delete 1
Success.
DGS-3000-26TC:admin#
63-3 config radius
Description
This command is used to configure a RADIUS server.