D-Link DGS-3000 series - Show Ssl

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
588
DGS-3000-26TC:admin#disable ssl
Command: disable ssl
Success.
DGS-3000-26TC:admin#
66-4 show ssl
Description
This command is used to display the certificate status. User must download specified certificate
type according to desired key exchange algorithm. The options may be no certificate, RSA type or
DSA type certificate
Format
show ssl {certificate}
Parameters
certificate – (Optional) Specifies that the SSL certificate will be displayed.
Restrictions
None.
Example
To show SSL:
DGS-3000-26TC:admin#show ssl
Commands: show ssl
SSL Status Enabled
RSA_WITH_RC4_128_MD5 0x0004 Enabled
RSA_WITH_3DES_EDE_CBC_SHA 0x000A Enabled
DHE_DSS_WITH_3DES_EDE_CBC_SHA 0x0013 Enabled
RSA_EXPORT_WITH_RC4_40_MD5 0x0003 Enabled
DGS-3000-26TC:admin#
To show certificate:
DGS-3000-26TC:admin#show ssl certificate
Command: show ssl certificate
Loaded with RSA Certificate!
DGS-3000-26TC:admin#