D-Link DGS-3000 series - Show Scheduling

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
557
62-7 show scheduling
Description
This command is used to display the current traffic scheduling parameters.
Format
show scheduling {<portlist>}
Parameters
<portlist> - (Optional) Specifies a range of ports to be displayed.
If no parameter specified, system will display all ports scheduling configurations.
Restrictions
None.
Example
To display the traffic scheduling parameters for each CoS queue on port 1(take eight hardware
priority queues for example):
DGS-3000-26TC:admin#show scheduling 1
Command: show scheduling 1
QOS Output Scheduling On Port: 1
Class ID Weight
-------- ------
Class-0 1
Class-1 2
Class-2 3
Class-3 4
Class-4 5
Class-5 6
Class-6 7
Class-7 8
DGS-3000-26TC:admin#
62-8 show scheduling_mechanism
Description
This command is used to show the traffic scheduling mechanism.
Format
show scheduling_mechanism {<portlist>}