D-Link DGS-3000 series - Show Accounting

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
78
Restrictions
Only Administrators can issue this command.
Example
To delete the user-defined accounting method list called “shell_acct” from the Switch:
DGS-3000-26TC:admin#delete accounting method_list_name shell_acct
Command: delete accounting method_list_name shell_acct
Success.
DGS-3000-26TC:admin#
5-32 show accounting
Description
This command is used to display the list of accounting methods on the Switch.
Format
show accounting [default | method_list_name <string 15> | all]
Parameters
default - Displays the user-defined list of default accounting methods.
method_list_name - Specifies the user-defined list of specific accounting methods.
<string 15> - Enter the name of the method list.
all - Displays all accounting method lists on the Switch.
Restrictions
Only Administrators can issue this command.
Example
To display the user-defined accounting method list called “shell_acct”:
DGS-3000-26TC:admin#show accounting method_list_name shell_acct
Command: show accounting method_list_name shell_acct
Method List Name Priority Method Name Comment
---------------- -------- --------------- ------------------
shell_acct 1 tacacs+ Built-in Group
2 radius Built-in Group
DGS-3000-26TC:admin#