DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
168
ma - (Optional) Specifies the maintenance association name.
<string 22> - Enter the maintenance association name her. This name can be up to 22
characters long.
ma_index - Specifies the maintenance association index.
<uint 1-4294967295> - Enter the maintenance association index value here. This value
must be between 1 and 4294967295.
mepid - (Optional) Specifies the MEP ID used.
<int 1-8191> - Enter the MEP ID used here. This value must be between 1 and 8191.
mepname - (Optional) Specifies the MEP name used.
<string 32> - Enter the MEP name used here. This name can be up to 32 characters long.
Restrictions
None.
Example
To delete the CFM link trace reply:
DGS-3000-26TC:admin#delete cfm linktrace mepname mep1
Command: delete cfm linktrace mepname mep1
Success.
16-21 show cfm mipccm
Description
This command is used to show the MIP CCM database entries. All entries in the MIP CCM
database will be shown. A MIP CCM entry is similar to a FDB which keeps the forwarding port
information of a MAC entry.
Format
show cfm mipccm
Parameters
None.
Restrictions
None.
Example
To show MIP CCM database entries:
To Next Page
Loading...
