DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
707
Appendix B
System Log Entries
The following table lists all possible entries and their corresponding meanings that will appear in
the System Log of this Switch.
Configuration saved to flash
Configuration saved to flash by
console(Username: <username>, IP:
System log saved to flash
System log saved to flash by
console(Username: <username>, IP:
Configuration and log saved to flash
Configuration and log saved to flash
by console(Username: <username>,
Internal Power is recovered
Internal Power is recovered
Redundant Power is working
Redundant Power is working
Temperature sensor enters alarm
Temperature sensor <sensorID>
enters alarm state (current
temperature: <temperature>)
Temperature recovers to normal
Temperature sensor <sensorID>
recovers to normal state (current
temperature: <temperature>)
Firmware upgraded successfully
Firmware upgraded by console
successfully (Username: <username>,
Firmware upgrade was unsuccessful
Firmware upgrade by console was
<username>, IP: <ipaddr> )
Configuration successfully
Configuration successfully
downloaded by console(Username:
<username>, IP: <ipaddr> )
Configuration download was
Configuration download by console
was unsuccessful! (Username:
<username>, IP: <ipaddr>)
Configuration successfully uploaded
Configuration successfully uploaded