D-Link DGS-3000 series - Enable Gvrp; Disable Gvrp

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
34
Restrictions
None.
Example
To display the global setting of GVRP:
DGS-3000-26TC:admin#show gvrp
Command: show gvrp
Global GVRP : Disabled
Join Time : 200 Milliseconds
Leave Time : 600 Milliseconds
LeaveAll Time : 10000 Milliseconds
NNI BPDU Address: dot1d
DGS-3000-26TC:admin#
3-17 enable gvrp
Description
This commands is used to enable the Generic VLAN Registration Protocol (GVRP).
Format
enable gvrp
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the generic VLAN Registration Protocol (GVRP):
DGS-3000-26TC:admin#enable gvrp
Command: enable gvrp
Success.
DGS-3000-26TC:admin#
3-18 disable gvrp
Description
This command is used to disable the Generic VLAN Registration Protocol (GVRP).