D-Link DGS-3000 series - Show Utilization Flash; Clear Counters

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
502
DGS-3000-26TC:admin#show utilization dram
Command: show utilization dram
DRAM Utilization :
Total DRAM : 131072 KB
Used DRAM : 118556 KB
Utilization : 90 %
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
53-5 show utilization flash
Description
This command is used to show the flash memory utilization.
Format
show utilization flash
Parameters
None.
Restrictions
None.
Example
To display FLASH utilization:
DGS-3000-26TC:admin#show utilization flash
Command: show utilization flash
Flash Memory Utilization :
Total Flash : 29618 KB
Used Flash : 5784 KB
Utilization : 19 %
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
53-6 clear counters
Description
This command is used to clear the Switch’s statistics counters.