D-Link DGS-3000 series - Chapter 43 MAC Notification Command List

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
399
Chapter 43 MAC Notification Command
List
enable mac_notification
disable mac_notification
config mac_notification {interval <sec 1-2147483647> | historysize <int 1-500>}
config mac_notification ports [<portlist> | all] [enable | disable]
show mac_notification
show mac_notification ports {<portlist>}
43-1 enable mac_notification
Description
This command is used to enable global MAC address table notification on the Switch.
Format
enable mac_notification
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable mac_notification function:
DGS-3000-26TC:admin#enable mac_notification
Command: enable mac_notification
Success.
DGS-3000-26TC:admin#
43-2 disable mac_notification
Description
This command is used to disable global MAC address table notification on the Switch.
Format
disable mac_notification