D-Link DGS-3000 series - Show Utilization Dram

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
501
DGS-3000-26TC:admin#show utilization cpu
Command: show utilization cpu
CPU Utilization
-------------------------------------------------------------------------------
Five seconds - 10 % One minute - 10 % Five minutes - 10 %
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
53-4 show utilization dram
Description
This command is used to show DRAM memory utilization.
Format
show utilization dram
Parameters
None.
Restrictions
None.
Example
To display DRAM utilization: