DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
615
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable SNMP:
DGS-3000-26TC:admin#disable snmp
Command: disable snmp
Success.
69-21 config snmp system_name
Description
This command is used to configure the name for the Switch.
Format
config snmp system_name {<sw_name>}
Parameters
<sw_name> - (Optional) Enter the SNMP system name used here. This name can be up to 255
characters long.
Restrictions
Only Administrators and Operators can issue this command.
Example
To configure the Switch name for “DGS-30xx”:
DGS-3000-26TC:admin#config snmp system_name DGS-30xx
Command: config snmp system_name DGS-30xx
Success.
69-22 config snmp system_location
Description
This command is used to enter a description of the location of the Switch.
To Next Page
Loading...
