D-Link DGS-3000 series - Page 218

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
214
20-22 show dhcp_relay ports
Description
This command is used to display the DHCP relay of each port.
Format
show dhcp_relay ports {<portlist>}
Parameters
<portlist> - (Optional) Specifies a list of ports to be displayed.
Restrictions
None.
Example
To display the DHCP relay state of port 1-10:
DGS-3000-26TC:admin#show dhcp_relay ports 1-10
Command: show dhcp_relay ports 1-10
Port State
---- ---------------
1 Enabled
2 Enabled
3 Enabled
4 Enabled
5 Enabled
6 Enabled
7 Enabled
8 Enabled
9 Enabled
10 Enabled
DGS-3000-26TC:admin#