DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
217
21-2 show filter dhcp_server
Description
This command is used to display the DHCP server filter list created on the Switch.
Format
show filter dhcp_server
Parameters
None.
Restrictions
None.
Example
To display the DHCP server/client filter list created on the Switch:
Command: show filter dhcp_server
Enabled Ports: 1-10
Trap & Log State: Disabled
Illegal Server Log Suppress Duration:5 minutes
Permit DHCP Server/Client Table:
Server IP Address Client MAC Address Port
----------------- ------------------ --------------------
10.90.90.20 All Client MAC 1-20
Total Entries: 1
To Next Page
Loading...
