D-Link DGS-3000 series - Page 257

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
253
DGS-3000-26TC:admin#create fdb vlanid 1 00-00-00-00-02-02 drop
Command: create fdb vlanid 1 00-00-00-00-02-02 drop
Success.
DGS-3000-26TC:admin#
30-3 create multicast_fdb
Description
This command is used to create a static entry in the multicast MAC address forwarding table
(database).
Format
create multicast_fdb <vlan_name 32> <macaddr>
Parameters
<vlan_name 32> - The name of the VLAN on which the MAC address resides. The maximum
name length is 32.
<macaddr> - The multicasts MAC address to be added to the static forwarding table.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create a multicast MAC forwarding entry to the default VLAN:
DGS-3000-26TC:admin#create multicast_fdb default 01-00-5E-00-00-00
Command: create multicast_fdb default 01-00-5E-00-00-00
Success.
DGS-3000-26TC:admin#
30-4 config multicast_fdb
Description
This command is used to configure the Switch’s multicast MAC address forwarding database.
Format
config multicast_fdb <vlan_name 32> <macaddr> [add | delete] <portlist>
Parameters
<vlan_name 32> - The name of the VLAN on which the MAC address resides. The maximum