DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
257
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To clear all FDB dynamic entries:
DGS-3000-26TC:admin#clear fdb all
Command: clear fdb all
Success.
30-9 show multicast_fdb
Description
This command is used to display the multicast forwarding database of the Switch.
Format
show multicast_fdb {[vlan <vlan_name 32> | vlanid <vidlist>] | mac_address <macaddr>}
Parameters
vlan - (Optional) The name of the VLAN on which the MAC address resides.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
vlanid - (Optional) Displays the entries for the VLANs indicated by VID list.
<vidlist> - Enter the VLAN ID list here.
mac_address - (Optional) Specifies a MAC address, for which FDB entries will be displayed.
<macaddr> - Enter the MAC address here.
If no parameter is specified, all multicast FDB entries will be displayed.
Restrictions
None.
Example
To display the multicast MAC address table:
To Next Page
Loading...
