D-Link DGS-3000 series - Page 290

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
286
Example
To unset port range 9-10 from IGMP snooping static member ports for group 239.1.1.1 on default
VLAN:
DGS-3000-26TC:admin#config igmp_snooping static_group vlan default 239.1.1.1
delete 9-10
Command: create igmp_snooping static_group vlan default 239.1.1.1 delete 9-10
Success.
DGS-3000-26TC:admin#
33-12 show igmp_snooping static_group
Description
This command is used to display the IGMP snooping multicast group static members.
Format
show igmp_snooping static_group {[vlan <vlan_name 32> | vlanid <vlanid_list>] <ipaddr>}
Parameters
vlan - Specifies the name of the VLAN on which the static group resides.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - Specifies the ID of the VLAN on which the static group resides.
<vlanid_list> - Enter the VLAN ID here.
<ipaddr> - Specifies the multicast group IP address.
Restrictions
None.
Example
To display all the IGMP snooping static groups:
DGS-3000-26TC:admin#show igmp_snooping static_group
VLAN ID/Name IP Address Static Member Ports
-------------- ------------------ ------------------------
1 / Default 239.1.1.1 9-10
Total Entries : 1
DGS-3000-26TC:admin#