D-Link DGS-3000 series - Page 302

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
298
33-22 show igmp access_authentication ports
Description
This command is used to display the current IGMP Access Control configuration.
Format
show igmp access_authentication ports [all | <portlist>]
Parameters
all - Specifies all ports to be displayed.
<portlist> - Specifies a range of ports to be displayed.
Restrictions
None.
Example
To display the IGMP Access Control status for ports 1-4:
DGS-3000-26TC:admin#show igmp access_authentication ports 1-4
Command: show igmp access_authentication ports 1-4
Port State
----- ---------
1 Enabled
2 Disabled
3 Disabled
4 Disabled
DGS-3000-26TC:admin#