DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
317
DGS-3000-26TC:admin#enable address_binding nd_snoop
Command: enable address_binding nd_snoop
Success.
34-18 disable address_binding nd_snoop
Description
This command is used to disable ND snooping on the Switch.
Format
disable address_binding nd_snoop
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the ND snooping function on the switch:
DGS-3000-26TC:admin#disable address_binding nd_snoop
Command: disable address_binding nd_snoop
Success.
34-19 config address_binding nd_snoop ports
Description
This command is used to specify the maximum number of entries that can be learned with ND
snooping. By default, there is no limit on the maximum number of entries that can be learned on a
port with ND snooping.
Format
config address_binding nd_snoop ports [<portlist> | all] max_entry [<value 1-50> | no_limit]
Parameters
<portlist> - Enter the list of ports used for this configuration.
To Next Page
Loading...
