D-Link DGS-3000 series - Page 478

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
474
Parameters
<vlan_name 32> - Enter the multicast VLAN name here. The VLAN name can be up to 32
characters long.
add - Specifies to associate a profile to a multicast VLAN.
delete - Specifies to de-associate a profile from a multicast VLAN.
profile_name - Specifies the multicast VLAN profile name.
<profile_name 1-32> - Enter the multicast VLAN profile name here. The name can be up to
32 characters long.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To add an IGMP snooping profile to a multicast VLAN group with the name “v1”:
DGS-3000-26TC:admin#config igmp_snooping multicast_vlan_group v1 add
profile_name channel_1
Command: config igmp_snooping multicast_vlan_group v1 add profile_name
channel_1
Success.
DGS-3000-26TC:admin#
50-8 show igmp_snooping multicast_vlan_group
Description
This command is used to show an IGMP snooping multicast VLAN group.
Format
show igmp_snooping multicast_vlan_group {<vlan_name 32>}
Parameters
<vlan_name 32> - (Optional) Enter the VLAN name here. The VLAN name can be up to 32
characters long.
Restrictions
None.
Example
To show all IGMP snooping multicast VLAN groups setup on the Switch: