D-Link DGS-3000 series - Page 534

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
530
Parameters
length_detection - (Optional) Displays the length detection configuration of power saving.
link_detection - (Optional) Displays the link detection configuration of power saving.
led - (Optional) Displays the port LED configuration of power saving.
port - (Optional) Displays the port configuration of power saving.
hibernation - (Optional) Displays the system hibernation configuration of power saving.
If no parameter is specified, all configurations of power saving will be displayed.
Restrictions
None.
Example
To display the power saving function setting:
DGS-3000-26TC:admin#show power_saving
Command: show power_saving
Function Version: 3.00
Link Detection State: Enabled
Length Detection State: Disabled
Power Saving Configuration On System Hibernation
----------------------------------------------------
State: Enabled
Time Range
--------------------------------
range_1
Power Saving Configuration On Port LED
------------------------------------------
State: Disabled
Time Range
--------------------------------
range_1
Power Saving Configuration On Port
------------------------------------------
State: Enabled
Port Time Range
------- --------------------------------
1 range_1
DGS-3000-26TC:admin#