DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
596
Example
To configure a SMTP server IP address:
DGS-3000-26TC:admin#config smtp server 172.18.208.9
Command: config smtp server 172.18.208.9
Success.
To configure an SMTP server port:
DGS-3000-26TC:admin#config smtp server_port 25
Command: config smtp server_port 25
Success.
To configure a mail source address:
DGS-3000-26TC:admin#config smtp self_mail_addr mail@dlink.com
Command: config smtp self_mail_addr mail@dlink.com
Success.
To add a mail destination address:
DGS-3000-26TC:admin#config smtp add mail_receiver receiver@dlink.com
Command: config smtp add mail_receiver receiver@dlink.com
Success.
To delete a mail destination address:
DGS-3000-26TC:admin#config smtp delete mail_receiver 1
Command: config smtp delete mail_receiver 1
Success.
68-4 show smtp
Description
This command is display the current SMTP information.
To Next Page
Loading...
